MF Digital USB SD 5000 Platform Series - Manual (Page 14)

14
© www.mfdigital.com USB SD Platform 5000 series
4.0 Function List
Function Description
1. Copy USB/SD/CF flash copy.
2. Compare This option makes bit-by-bit comparison between
the master source and all other copied flash cards.
3. Copy+Compare This option will make a copy first and then
compare the copied flash with the source,
immediately after the copy has finished.
4. Capacity check Checks the real capacity of the Flash
5. Information 5.1 SD/USB info - This feature will show the
USB/SD flash’s information i.e. file format, content
size and capacity.
5.2 System Info -This feature will show system
information for the duplicator i.e. controller model
number and software version.
6. Utility 6.1 Format – Use this function to perform FAT
16/32 formatting of flash cards.
6.2 Measure Speed -This function can measure the
read and write speed of the Flash card. This
function won’t damage the format or content.
6.3 Media check
6.3. Safe mode – Use this function to check the
quality of the flash by reading the flash card. The
safe check will not delete flash content or format.
6.3.2 Normal mode – Use this function to check the
quality (“0”) by reading/writing the flash (“1”). The
normal check will delete the content and format.
6.3.3 Setup Range – Use this function to set up the
area media check will examine. Range can be set
from 1% to 100%
6.4 Quick Erase – Use this function to erase
USB/SD flash content. It will keep the FAT format.
6.5 Full Erase SD/USB – Use this function to
completely erase USB/SD flash data including
format and content.
6.6 System Update - System firmware update via
the SD/USB