Malone MPG107MD - Manual (Page 4)

MALONE
R
Installation & Loading Instructions - MPG107M (MD) SeaWing
. Thread the free strap ends up and through
the buckles. Pull down to tighten. Dress
any extra strap down and around the cross
bars. See image 13.
. Pull the free end of each strap loop down until the
buckles are positioned half way up the side of the
kayak. Thread each free end down and through the
top of the outside slot and back up through the
bottom of the inside slot. See image 12.
. For MD series: Install the bow & stern safety lines per the attached instructions.
TM
MALONE AUTO RACKS, 81 County Road, Westbrook, Maine 04092
Phone: 207-774-9100 Fax: 207-615-0551
Website: www.maloneautoracks.com Email: [email protected]
12
13
Safety tie-downs are required for all transport. If your kit did not include
safety tie-downs, we strongly recommend the use of the Malone
MPG316 Sentry Ratchet Tie-Down System.
IMPORTANT NOTES:
Always check mounting hardware, load straps and safety tie-down lines for proper
and secure attachment before transport. Use of this product for any other
application other than kayak transport voids warranty.
For added stability for larger kayaks, dress the straps down under the cross
bars before bringing them back up through the slots in steps 7 and 12.