Mpg115md instructions #3, Malone – Malone MPG115MD User Manual

Page 4

MALONE

. Place the 1st kayak onto the foam

blocks and against the carriers. Place

the loops over the kayak. Dress the

free ends of the straps under the

cross bar and back up and through the

buckles. Pull down to tighten.

See image 13.

. Place the strap loops parallel to the carriers

with the front strap loop on the windshield

and the rear strap loop on the back of the

vehicle. See image 12.

. Confirm that the kayak is evenly seated on

the foam blocks and securely strapped to

the carriers. See image 14.

Installation & Loading Instructions - MPG115MD Stax Pro2

. Repeat steps 11-14 for loading the

second kayak. See image 15.