Longshine GT150 - Manual (Page 12)

4 EMB-M3 User`s Manual
Specifications
• Processor Support:
One Socket 478 supports single Intel® Pentium® 4 series
processors
Intel® Celeron® based on 0.13μcore, 400MHz FSB, up to
1.80GHz.
Intel® Celeron® based on 90nm core, 400MHz FSB, up to
2.80GHz.
Intel® Pentium® 4 based on 0.13μcore, 512KB L2,
400MHz FSB, with HT Technology, up to 2.80 GHz.
Intel® Pentium® 4 based on 90nm μcore, 1MB L2,
400MHz FSB, with HT Technology, up to 2.80 GHz.
Intel® Pentium4-Mobile 1.2GHz on 90nmμcore, 256KB
L2, 400MHz FSB.
VRD 10.2 specification Complaint design.
Support Intel Mobile Pentium4 CPU.
• System Memory:
One DDR DIMM 184-pins Sockets support DDR 200/266
unregistered non-ECC up to 1.0 GB.
• Video Controller:
852GM Integrated Graphic Engine.
One 15-Pins D-Sub Female connector for CRT Display.
One 40-pins 1.25mm pitch connector for Dual 18/24-bits
LVDS LCD displays.
One 5-pins JST connector for LCD panel Backlight Inverter
power support.
• Super I/O:
Winbond 83627HF LPC I/F Super I/O chip.
Four RS-232 Serial ports as COM1~COM4 in D-Sub 9-pins
male connector on rear panel. Pin9 can be powered with 5V
or 12V or as ring-in, selected by a Jumper. COM4 is
RS232/422/485 selectable.
One Parallel port supports SPP/ECP/EPP mode in D-Sub
25-Pins Female connector on rear panel.
Two USB2.0 ports in 2x5 pin-header for front panel or
internal USB devices.
Four USB2.0 ports on rear for external USB devices.
One Floppy connector supports up to two floppy devices.