Cabletron Systems BRIM-A6 - Manual (Page 33)

Chapter 3: Local Management
Page 3-14 BRIM-A6 User’s Guide
3.3.9 Deleting a PVC
To delete a PVC, perform the following steps:
1. Use the arrow keys to highlight the VPI field and enter the VPI of the
PVC you want to delete.
2. Use the arrow keys to highlight the VCI field and enter the VCI of the
PVC you want to delete.
3. Use the arrow keys to highlight the AAL Type field and press the
SPACE bar until the AAL Type of the PVC you want to delete
appears.
4. Use the arrow keys to highlight the Encapsulation Type field and press
the SPACE bar until the Encapsulation Type of the PVC you want to
delete appears.
5. Use the arrow keys to highlight the DELETE command.
6. Press ENTER. The “ENTRY DELETED” message appears at the top
of the screen indicating that LM has deleted the PVC.
NOTE
LM automatically saves entries when you exit the field.
book Page 14 Thursday, April 18, 1996 2:18 PM