Cabletron Systems BRIM-A6 - Manual (Page 26)

Using LM to Create PVCs
BRIM-A6 User’s Guide Page 3-7
3.3 USING LM TO CREATE PVCS
LM for the BRIM-A6 provides screens that let you add, delete or modify
PVCs. This screen displays both Permanent Virtual Connections (PVCs)
and Switched Virtual Connections (SVCs). SVCs are dynamic
connections that are created and deleted as required by applications,
equipment, and ATM facilities. SVCs can not be deleted from the LM
screens. LM consists of the following screens:
• The BRIM-A6 Setup screen: This is a view only screen which displays
the settings for each PVC and SVC.
• The BRIM-A6 Add/Delete Entry screen: This screen allows you to
add, delete, and configure PVCs.
To access BRIM-A6 LM, perform the following steps:
1. Use the arrow keys to select the BRIM-A6 option from the Setup
Menu screen.
2. Press ENTER. The BRIM-A6 Setup screen, Figure 3-2, appears.
Figure 3-2 The BRIM-A6 Setup Screen
Local Management Flash Image Version: XX.XX.XX
BRIM-A6 SETUP
ATM Port Total Current Connections: 2
VPI VCI Encapsulation Type AAL Type Oper. Status
0 0014 VC Mux Bridged 802.3 5 Enabled
0 0040 LLC Encapsulation 3/4 Disabled
ADD/DELETE
PREVIOUS NEXT ENTRY RETURN
131105
book Page 7 Thursday, April 18, 1996 2:18 PM