Cabletron Systems BRIM-A6 - Manual (Page 24)

Using LIM to create PVCs
BRIM-A6 User’s Guide Page 3-5
3.2.2 ATM Connection Tables Screen Commands
The following commands appear at the bottom of the ATM Connection
Tables screen commands:
Save
This command lets you save all changes to the Connection Tables screen.
Clear VCCs
The Clear Virtual Channel Connection (VCC) command lets you clear all
PVCs from the Connection Tables screen. This command does not let you
clear SVCs from the Connection Tables screen because SVCs are
dynamic connections that are created and deleted as required by
applications, equipment, and ATM facilities.
Next/Previous
This command lets you scroll to the next screen or back to the previous
screen. If the ATM Connection Tables screen has over 6 channels, it
automatically continues onto a new screen.
Return
This command lets you exit from the ATM Connections Tables screen.
3.2.3 Using ATM Connection Tables Screen Commands
To use ATM Connection Tables screen commands, perform the following
steps:
1. Use the arrow keys to highlight an ATM Connection Table screen
command.
2. Press ENTER, LIM executes the selected command.
NOTE
Connection 1 (VPI-0, VCI-14) and Connection 2 (VPI-0,
VCI-15) are used by Fore Systems SPAN signalling and can
not be deleted from the Connection Tables screen.
book Page 5 Thursday, April 18, 1996 2:18 PM