Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 22)

20
G. Care and Maintenance:
1. Take care not to drop or knock the dot sight once it
is zeroed.
2. Maintain the metal surface of the dot sight by
removing any dirt or sand with a soft brush so as to
avoid scratching the finish.
3. Wipe the lens with a clean flannel cloth to keep it
clean and dry. In order to avoid scratching the glass,
ensure both the lens and cloth are clean. Do not use
finger or finger nail to touch/clean lenses.
4. Store the dot sight in a cool dry place when not in
use. Be careful to avoid contact with acid, alkaline
or corrosive chemicals.
5. Do not attempt to lubricate any part of the dot sight.
6. Do not disassemble the dot sight. Do not loosen or
remove screws or parts. Any such or similar actions
will void the warranty.
CAUTION: Viewing the sun can cause serious eye
injury. Never look directly into the sun with this or any
optics.