Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 13)

11
5. Use the included Allen wrench to adjust the
Hex Screw at the side of the cam for proper
tension and fit against the rail. Adjust clockwise
to increase the tension and tighten the clamping
width. Adjust counter-clockwise to decrease the
tension and increase the clamping width.
6. The optimal tension is achieved when the side
plate first makes contact with the Picatinny rail
while the Cam Lever still has enough travel left
for you to securely snap into its locking position.
Once you achieve the optimal tension, push the
Cam Lever all the way for a positive lock onto
the rail. You may repeat Step 3 and 4 if needed
to find the best clamping tension and locking
position for your mount. This process adapts the
mount to your specific rail.