Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 19)

17
II. To lock Zero Deadlock Turrets: Use the
included small Allen wrench to fully lock
down the screw by turning it clockwise as shown
in Fig. 12.
5. ZEROING - Make sure to un-lock turrets before
performing this step.
I. Zeroing with a Bore Sighter
A. When the turret is ready for adjustment, you
will able to dial and have a clear audible
click.
B. Follow the instruction of your bore sighter
and install it in the muzzle of your rifle, lining
it with the dot sight as closely as possible.
C. Turn on the illumination and set it at your
prefered color and brightness.
D. Sighting through the dot sight as though you
were going to shoot and dial the knobs to
make adjustment for the elevation and/or