Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 11)

9
1. Hold the rifle in your natural shooting position.
Place the scope onto the Picatinny rail on the rifle
to estimate the best position for your shooting
preference. Then set the rifle at a steadying device.
2. CAUTION: For SCP-DS3840W, SCP-DS3039W and
SCP-DS3026W, always double check to ensure that
screws attaching the mounting base to the scope
body are securely tightened before shooting.
B1. Install the Dot Sight onto the Rifle:
( for Dot Sights with QD Mounts )
II. Install QD Mount: Based on your eye
relief preference, select two holes on the
QD mount and align them to the mating holes
on the extruded part of the riser. Install and fasten
the remaining two screws to fully secure the mount as
shown in Fig 1.