Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 15)

13
D. On/Off Switch and Brightness Adjustment:
1. Dial the rheostat to turn on the illumination.
2. For SCP-RD40RGW-A, the white
dot on the left side of the sight
indicates the current setting
as shown in Fig. 7. When the
Current Setting is “R” or “G”, the
unit is off.
3. Red/Green colored coded
numbers(Fig. 7) or the red/
green band (Fig. 8) indicates the
brightness of the illumination.
4. Select the color illumination and
adjust to the desired brightness.
5. To conserve battery life, always
turn off when not in use.
Fig 7
Fig 8
4. Remove the battery (if there is one) and install
a new one with + side(anode) facing out.
5. Replace the cap and screw it clockwise to
tighten.