Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) - Manual (Page 20)

18
windage until the crosshair matches the bore
sighter.
II. Zeroing on a Target
A. Place a target 100 yards away (35 yards for air
gun).
B. Use a steadying device such as a shooting
stand or bipod, set the illumination to your
prefer settings, aim at the center of the target
and fire a test group shot, if safe to do so.
C. If the impact point of the test shot is exactly
in the center of the target then the dot sight is
zeroed. If not, you will need to adjust the reticle
using the elevation and/or windage adjustment.
Follow the Point of Impact (POI) direction on
the turret to dial the knob accordingly.
D. Having adjusted the elevation and windage
as required, fire, if safe to do so, another test
group. Keep adjusting and test firing until the test
shot hit the target center in an acceptable small
grouping.