KERN & SOHN AEJ 100-4NM - Manual (Page 56)

56 AEJ_N/AES_N-BA-e-1321
• for selection ”optional reference piece number“ FrEE

Select the place to be changed by pressing the F-key

Select the digit by pressing the UNIT-key

Confirm the entered reference piece number by pressing the PRINT-key

“LoAd“ appears on the display.
− Place as many counting parts on the balance as the set reference quantity
requires, confirm by pressing the PRINT key.
Note:
If there is no load on the weighing plate when the PRINT-key is pressed,
“Er5 outr“ will appear briefly on the display before the display of the
balance returns automatically to weighing mode.

Remove reference weight. The balance is now in parts counting mode counting
all units on the weighing plate.