KERN & SOHN AEJ 100-4NM - Manual (Page 36)

36 AEJ_N/AES_N-BA-e-1321

Confirm your selection by pressing the PRINT-key; weighing scale will return to
menu.

For returning to weighing mode with set weighing unit, see chap. 8.2.
9.4 Weighing units switch-over
A weighing unit may be changed by pressing the UNIT-key several times:
[g]
→ [mg] → [ct] → [oz] → [ozt] → [dwt] → [t] → [mom]→ [G] → [g]
Note:
In calibrated model selection is restricted to options [g]
→ [mg] → [ct].
9.5 Taring
The dead weight of any weighing container may be tared away by pressing a button, so that
the following weighing procedures show the net weight of the goods to be weighed.

Put vessel of goods to be weighed on weighing plate and close the wind
screen doors.

Wait until the stability display appears ( ), then press TARE. The weight of
the container is now internally saved.

Weigh the goods to be weighed and close the wind screen doors.

Wait until the stability display appears ( ).

Read net weight.
• When the balance is unloaded the saved taring value is displayed with
negative sign.
• To delete the stored tare value, remove load from weighing pan and
press TARE.
• The taring process can be repeated any number of times. The limit is
reached when the whole weighing range is exhausted.