KERN & SOHN AEJ 100-4NM - Manual (Page 16)

16 AEJ_N/AES_N-BA-e-1321
6.2.2 Placing

Installation of weighing plate
Models with weighing pan ø 85mm Models with weighing pan ø 70mm
 Assemble all parts in the right order.
 Close gates.
 For instructions on how to connect the weighing scale to the
power supply see chap. 6.3.

Level balance with foot screws until the air bubble of the water balance is in the
prescribed circle

Check levelling regularly
6.3 Mains connection
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage.
Only use original KERN mains adapters. Using other makes requires consent by
KERN.