KERN & SOHN AEJ 100-4NM - Manual (Page 38)

38 AEJ_N/AES_N-BA-e-1321
9.7 Selecting the operating mode
To enable operating modes that are available to the user without having to go to the
menu every time, go to the “P6 Func” menu. All activated operating modes can be
called directly by pressing the key.

If you wish to have several operating modes callable via the key, select
ALL for a setting.
For selection of accessible operating modes, see chap. 9.7.1.

If you wish to access only one operating mode via the key, select it directly
via the UNIT key. (For instance PcS for piece counting)