KERN & SOHN AEJ 100-4NM - Manual (Page 43)

AEJ_N/AES_N-BA-e-1321 43
10.3 Auto Zero
This function is used to tare small variations in weight automatically.
In the event that small quantities are removed or added to the material to be
weighed, incorrect weighing results can be displayed due to the “stability
compensation“. (e.g. slow flow of liquids from a container placed on the balance,
evaporating processes).
When apportioning involves small variations of weight, it is advisable to switch off this
function.

Confirm your selection by pressing the PRINT-key; weighing scale will return to
menu.

Return to weighing mode, see chap. 8.2.
AutoZero turned on
AutoZero turned off