KERN & SOHN DBS 60-3 - Manual (Page 61)

DBS-BA-e-1311 61
10.4 Change password
Standard password (factory setting): „9999“
1. Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.
2. Use the navigation key   to select menu item
„PASS“.

3. Acknowledge using ENTER key, the password
inquiry is displayed. The active digit is flashing.
4. Use the navigation buttons to enter the currently
set password, see chap. 7.1.1 “Numerical input”.
+
Default setting: „9999“.
+
If the correct password has been entered, „ok“ will be displayed.
+
If the password has been entered incorrectly, „NG“ will be displayed.
Repeat password input from step 1.
 Use the navigation buttons to enter a new
password, see chap. 7.1.1 “Numerical input”.
 Press ENTER to save the input and the display
will change to “SET” followed by “PASS”.
 Press ESC to return to Moisture analysis mode.