KERN & SOHN DBS 60-3 - Manual (Page 48)

48 DBS-BA-e-1311
 Press ENTER to confirm selection. The currently
present switch-off criterion will be displayed.
 Use navigation buttons   to select the
required setting,
TIME = time-controlled
∆M = automatic

TIME setting
 Press ENTER to confirm selection. The currently
set drying time is displayed.
 Use navigation buttons   to select the
required setting, 1 minute – 4 hours (1 minute
increments) or 4 hours - 12 hours (1 hour
increments) can be selected
 Press ENTER to save.
 Press ESC key to return to weighing mode. The
moisture analysis can be started (see chap. 8.2).
All the settings that have been made control the
drying process.
or
Setting
∆M
 Press ENTER to confirm selection. The currently
preset value for
∆M will be displayed.
 Use navigation buttons   to select the
required setting,
0.01% – 0.1% (0.01% increments) can be
selected.
 Press ENTER to save.
 Press ESC to return to Moisture analysis mode.
The equipment is ready to measure
(see chap. 8.1). All the settings that have been
made control the drying process.