KERN & SOHN DBS 60-3 - Manual (Page 59)

DBS-BA-e-1311 59
10.3 Menu Lock
The menu setting operations can be locked so that the settings cannot be changed.
The following menu blocks are available despite menu lock.
+ PRG-No / call up drying programs, see chap. 9.1
+ LoCK / menu lock, current chap.
+ PRINT / output of measuring results, see chap. 11.4
Activate menu lock:
1. Press the Menu button to access the menu and
the first menu item “PRoGRM” will be displayed.

2. Use the navigation key
  to select menu item
„LoCK“.
3. Acknowledge using ENTER key, the password
inquiry is displayed. The active digit is flashing.
4. Use the navigation buttons to enter a new
password, see chap. 7.1.1 “Numerical input”.
+
Default setting: „9999“.
+
Change password, see following chapter
+
If the correct password has been entered, „ok“ will be displayed.
+
If the password has been entered incorrectly, „NG“ will be displayed.
Repeat password input from step 1.
5. Press ENTER to confirm. The current setting will
be displayed.
 Press ESC if “LOCK” is displayed.
 The menu lock is activated. The equipment
reverts to Moisture analysis mode.