beautypg.com

1 through the cabinet mounting, Eight-door concentrator, Quick s tart guide kdc-8 – Keri Systems Eight-Door Concentrator User Manual

Page 2

background image

Eight-Door Concentrator

2305 Bering Drive

01959-001 Rev. 1.1

San Jose, CA 95131 USA
(800) 260-5265 (408) 435-8400 FAX (408) 577-1792
Web: http://www.kerisys.com E-mail: [email protected]

Page 2 of 24

Quick S

tart Guide

KDC-8

2.1

Through the Cabinet Mounting

The easiest mounting method is wall mounting through mounting holes within the cabinet. There
are three key-hole screw slots and three screw through-holes for secure mounting. Have an assistant
hold the unit in the desired mounting place and mark the mounting locations, see Figure 2 (if there
are controllers in the cabinet, please remove them before mounting the enclosure). Drill pilot holes
in the marked locations and then install the unit.

Note: When fully loaded, the unit weighs 19 pounds (before cabling). Mount the unit securely
against the wall using molly-bolts or by securing at least two mounting screws to a wall stud.

Figure 2: Through-the-Cabinet Mounting Dimensions