Keri Systems EntraGuard Silver Quick Start - Manual (Page 16)

EntraGuard
®
Silver Telephone Entry Control
Quick Start Guide
Page 16 of 27 P/N: 01960-001 Rev. D
5.2.2.1 Direct Serial Connection – Controller to PC
To make the connection between the EntraGuard master controller and the host computer you will use one cable.
• If the host computer has a male DB-9 connector on the serial port, you must use a Keri Systems KDP-252 cable or
create a cable according to the drawing in Figure 16.
• If the host computer has a male DB-25 connector on the serial port, you must use a Keri Systems KDP-251 cable or
create a cable according to the drawing in Figure 17 on page 16.
The Keri Systems part number for this cable is KDP-252.
Figure 16: PC/DB-9F to Telephone Entry/TB-12 RS-232 Direct Serial Connections
The Keri Systems part number for this cable is KDP-251.
Figure 17: PC/DB-25F to Telephone Entry/TB-12 RS-232 Direct Serial Connections