Keri Systems PXL-380 - Manual (Page 3)

PXL-380 Access Controller
Installation Guide
Page 3 of 7 P/N: 01239-002 Rev. D
2.2 Wiegand Reader
3.0 Comm Board
The Comm Board provides the external link from master controller to host PC. Comm Boards are only needed for the
master controller for each site. The Comm Board provides communication via either RS-232 serial/direct-connect,
modem, or USB. For Ethernet/LAN communications a LAN-520 is still required (replacing the Comm Board). The
Comm Board is not provided with the controller, but must be ordered separately.
2
3
5
6
7
Wiring applies to both TB-5 / A-Reader and TB-6 / B-Reader.
Refer to the Wiegand Reader’s documentation for wire colors.
Data0
Beeper
Power
Ground
Green LED
Red LED
Cable Shield
Data1
Function
1
4
TB-5/6
1 2 3 4 5 6
USB Mini-B
Connection
JP1 JP2
JP1 and JP2 on upper pins
for direct-connect serial and
modem communication.
JP1 JP2
JP1 and JP2 on lower pins
for USB to serial communication.
JP1 JP2
D5/D6 - Comm Activity LEDs
USB to Serial
D3/D4 - Comm Activity LEDs
RS-232/Modem
DB-9M
(back side of connector)
Direct-to-PC Connection Modem Connection
DB-9F
(back side of connector)
1 2 3 4 5
7
1 2 3 4 5 6
2 3 5 1
1 2 3 4 5 6