Kenton Control Freak all versions User Manual

Page 33

Example of sending on multiple MIDI channels from one slider

How to make a slider send MIDI volume on two MIDI channels at the same time

In the example below, we’re using MIDI Channels 1 & 2.

Press the [––>] key

from home position to start edit and display the edit menu options.

Turn the Data Wheel to the right (clockwise) until the display shows:

EDIT`SLIDER`DATA

Press the [––>] key and use the Data Wheel to select the Slider to Edit

Press the [––>] key – leave Minimum Levl at 0

Press the [––>] key – leave Maximum Levl at 127

Press the [––>] key – the display will show:

````COMMAND
``End`of`DATA

Turn the Data Wheel to the left (anti-clockwise) until the display shows:

Set`MIDI`Chan`1

Press the [––>] key – the display will again show:

````COMMAND
``End of DATA

Turn the Data Wheel one click to the right and the display will show:

```Controller

Press the [––>] key – the display will show:

Controller`Numbr
0``Bank Select

Turn the Data Wheel to the right (clockwise) until the display shows:

7``Main Volume

Press the [––>] key – the display will show:

Controller`Value
Data`Val`00h`0

Turn the Data Wheel one click to the left - the display will show:

Data`from`Slider

At this point you have set the slider to send MIDI volume (controller #7) on MIDI Channel #1.

Continue as follows to make it also send on Channel #2.

Press the [––>] key – the display will show:

````COMMAND
``End`of`DATA

Turn the Data Wheel to the left (anti-clockwise) until the display shows:

Set`MIDI`chan``2

Press the [––>] key – the display will again show:

````COMMAND
``End`of`DATA

Turn the Data Wheel one click to the right - the display will show:

```Controller

Press the [––>] key – the display will show:

Controller Numbr
0``Bank`Select

Turn the Data Wheel to the right (clockwise) until the display shows:

7``Main`Volume

Press the [––>] key – the display will show:

Controller`Value
Data`Val`00h```0

Turn the Data Wheel one click to the left and the display will show:

Data`from`Slider

CONTROL FREAK

EDITING EXAMPLES