Kenton Control Freak all versions User Manual

Page 23

SysEx dump block
This allows you to dump various different data blocks to an external storage

device. Pressing the [––>] button will move to the next screen:

The Data Wheel can be used to select from the available blocks.

For example Slider block dumps every slider in every program.

‘All 64 Programs’ sends a very large SysEx dump of the entire 64 programs to

allow you to clone one Freak from another. Note however that you will need

to clear the memory of the target Freak first.To do this, you need to turn it off,

then turn it on again whilst you hold all four F keys pressed. Caution – this

will wipe any profiles you have in the machine.

Pressing the [––>] button will move to the next screen:

Pressing [STORE] will dump the chosen data from MIDI Out.

Library mode
Reserved for future use.

Copy operations

Copy single
This allows you to copy any single slider, button or function key data to any

other slider, button or function key destination.

Pressing the [––>] button will move to the next screen:

The Data Wheel can be used to change the source program if required.

The bottom line shows the name of the slider, button or F key, not the program.

Pressing the [––>] button will move the cursor across to the right.

The initial setting sldr x can be changed using the Data Wheel and the top

left three buttons in combination with [SHIFT].

Pressing the [––>] button will move to the next screen:

The Data Wheel can be used to select a destination program.

Pressing the [––>] button will move the cursor across to the right.

Select a destination slider/button/F key.The initial setting sldr x can be

changed as previously described.

Pressing the [––>] button will move to the next screen:

Pressing [STORE] will then copy the source data to the chosen destination.

EDIT MENU 20

EDIT MENU 19

EDIT MENU 18

CONTROL FREAK

EDIT MENUS

SYSEX`DUMP`BLOCK
Push`>`to`Select

``Block`Select``
``Slider`Block``

`Push`STORE`Key`
to`Send`Syx`Dump

``LIBRARY`MODE``
Push`>`to`Select

```COPY`SINGLE``
Push`>`to`Select

Fm`Prg``0`Sldr`1

````````_```````
`Volume`Chan``1`

```````````````_
`Volume`Chan``1`

To`Prg`40`Sldr`1

To`Prg``0`B.On`2

````````_```````

```````4```````_

`Push`STORE`Key`
to`Start`Copying