Kenton Control Freak all versions User Manual

Page 21

Global operations

Global name
This allows you to enter a startup name.This name will be seen on power up,

and is edited in the same way as slider names.

Press [STORE] then [EXIT] or use [SHIFT]/[STORE] to jump to

Global data

Pressing the [––>] button will take you into the Global edit pages:

This allows you to set a default for the Global MIDI channel, which will be

remembered on power off/on.

Pressing the [––>] button will move to the next screen:

This allows you to set a default tempo which will be remembered on power

off/on.

Pressing the [––>] button will move to the next screen:

This allows you to set a SysEx device number for the Freak itself,

and also to set the Control Freak

STUDIO EDITION

to accept Control Freak

ORIGINAL

profiles.You then use SysEx RX prog map to choose destination

programs for incoming profiles.

Range: 1-16 and “Dev =8 ch Freak”.You can usually leave this at 1 unless you

want to load 8 channel Freak data, in which case turn the Data Wheel one

click anticlockwise to show ‘Dev=8 ch Freak’.

Then press [STORE] to activate.

Pressing the [––>] button will move to the next screen:

Even numbered 8-channel profiles will go into the left sliders (1-8).

Odd numbered profiles will go into the right sliders (9-16).

This screen shows the first byte of an 8 byte Global SysEx header.You can enter

a string of up to 8 bytes here, which can be used in any SysEx string within any

program by selecting Global Sysex Header from the data variables list.

When you are in

PLAY MODE and the data is being sent, the bytes are read

starting with byte #1 and will stop either when all 8 bytes have been sent or

when an End of DATA is encountered.

Press [STORE] to save any edits

then [EXIT] to return to

PLAY MODE.

*1 The MIDI channel and Int clock tempo settings can be altered in real-time by accessing the

Real-time edit menu [<––]. Any changes made will be temporary and on power off/on will

default to the settings made in Global data as described above.

EDIT MENU 14

EDIT MENU 13

CONTROL FREAK

EDIT MENUS

EDIT`GLOBAL`NAME
Push`>`to`Select

EDIT`GLOBAL`DATA
Push`>`to`Select

`````Global`````
MIDI`Channel```1

`````Global`````
Int`Clock````120

`````Global`````
Device`Number``x

Sysex``Byte`#``1
Data`Val`00h```0

UPDATING``MEMORY
....````````````