Canon IXUS 115 HS - Manual (Page 180)

Using an Eye-Fi Card
180
Checking Connection Information
You can check the Eye-Fi card’s access point SSID, or connection status.
Choose [Connection info].
 Press the n button to choose [Eye-Fi
Settings] from the 3 tab, then press the
m button.
 Press the op buttons to choose
[Connection info], then press the m
button.
 The connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Disable] in [Eye-Fi trans.].
 Press the n button to choose [Eye-Fi
Settings] from the 3 tab, then press the
m button.
 Press the op buttons to choose [Eye-Fi
trans.], then press the qr buttons to
choose [Disable].
• The power saving function does not work while transferring images
(p. 52) .
• Choosing will interrupt the Eye-Fi connection. Choosing another
Shooting mode or entering Playback mode will reopen the Eye-Fi
connection, but movies made with the Movie Digest function may be
retransferred.
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.
If the Eye-Fi card has a write-protect tab, you will not be able to check the
card’s connection status, or set [Eye-Fi trans.] to [Disable] when the tab is
in the locked position.