Avaya P460 - Manual (Page 58)

Chapter 7 Establishing Switch Access
44 Avaya P460 Installation and Maintenance Guide
L You can now configure the P460.
L You can connect the Out-band interface to either of the Supervisor modules.
Outband Interface Connection CLI Commands
In order to... Use the following command...
Configure the management
interface set interface outband
Enable the outband interface enable interface outband
Disable the outband interface disable interface outband
Enable or disable the link
negotiation protocol on the Fast
Ethernet console port set outband negotiation
Set the speed of Fast Ethernet
Console port set outband speed
Set the duplex mode of the Ethernet
Console port set outband duplex
Display information on the device
network interfaces show interface
Display outband interface
parameters show outband
Send an ICMP echo request packets
to another node on the network. ping