Avaya P460 - Manual (Page 40)

Chapter 5 Avaya P460 Panels
26 Avaya P460 Installation and Maintenance Guide
Table 5.3 summarizes the functions of the LEDs for a standby or halted
M460ML-SPV supervisor module.
PWR Power information ON Power is up
Blinking Power management error: the
switch cannot supply power to
at least one module
OFF Power is off
Table 5.2 Active M460ML-SPV FastETH LED
LED Description State Meaning
Fast
ETH Management outband
Ethernet link status ON Port enabled and link OK
No data transmitted or
received on the port
Blinking Port enabled and link OK
Data transmitted or received
on the port
OFF Link is not operating
Table 5.3 Standby/Halted M460ML-SPV LEDs
LED Description State Meaning
ACT Active SPV indication OFF
ROUT Device switching mode OFF
OPR CPU operation ON CPU boot and BIT completed
Module in Standby mode
Blinking Module in Halted mode or
CPU and BIT not completed
PWR Power information ON Power is up
OFF Power is off
Table 5.1 Active M460ML-SPV LEDs
LED Description State Meaning