Configuration defaults, Introduction, Default system parameters – Avaya P460 User Manual
Page 75: Chapter 10, Table 10.1
Avaya P460
Installation and Maintenance Guide
61
Chapter 10
Configuration Defaults
Introduction
This chapter defines the default parameters for the P460 switch.
Default System Parameters
Table 10.1
Default System Parameters
Parameter
Default Value
All IP addresses
N/A (0.0.0.0)
Default gateway
N/A (0.0.0.0)
CLI timeout
15 minutes
User name
root
Password
root
PPP interface
Disabled
Out-of-band interface
Disabled
In-band interface
Disabled
In-band ARP Tx interval
5 seconds
Out-of-band ARP Tx interval
5 seconds
VLANs
1 on all ports
Spanning Tree
Enabled
Bridge priority for Spanning Tree
32,768
NTP server IP address
N/A
Time zone offset
0 hours
Timezone
GMT
Read-only SNMP community string
public