Avaya p460 panels, Introduction, M460ml-spv panel – Avaya P460 User Manual
Page 39: M460ml-spv leds, Chapter 5, Avaya p460 panels introduction m460ml-spv panel, Table 5.1, Active m460ml-spv leds, Figure 5.1
Avaya P460
Installation and Maintenance Guide
25
Chapter 5
Avaya P460 Panels
Introduction
This chapter describes the front panels of the P460 switch modules, including the
LEDs, ports and buttons.
M460ML-SPV Panel
M460ML-SPV modules can operate in three modes: Active, Standby and Halted.
Each mode is reflected in the LEDs – further details are provided in Table 5.1.
M460ML-SPV LEDs
Figure 5.1
M460ML-SPV LEDs
Table 5.1 summarizes the functions of the LEDs for an active M460ML-SPV
supervisor module.
Table 5.1
Active M460ML-SPV LEDs
LED
Description
State
Meaning
ACT
Active SPV indication
ON
ROUT
Device switching mode
ON
Layer 3
OFF
Layer 2
OPR
CPU operation
System status
ON
CPU boot and BIT (built-in
test) completed
Blinking
CPU booting or running BIT
Fan module not installed.
OFF
CPU cannot boot (see Chapter
12, "Troubleshooting the
Installation")