Cisco OL-18613-01 - Manual (Page 10)

19-10
Cisco Unified Communications Manager Features and Services Guide for Cisco Unified Communications Manager Business Edition
OL-18613-01
Chapter 19 Do Not Disturb
How to Use the Do Not Disturb Feature
Adding DND to Common Phone Profiles
To add DND to a common phone profile, navigate to Device > Device Settings > Common Phone
Profile and choose the phone profile that you want to modify. In the Common Phone Profile
Configuration window, configure the DND parameters that are shown in
Table 19-3 .
How to Use the Do Not Disturb Feature
This section provides instructions for using Do Not Disturb, as well as usage examples for different Do
Not Disturb call scenarios.
• Using the Do Not Disturb Feature, page 19-11
• Do Not Disturb Usage Examples, page 19-11
Table 19-3 Common Phone Profile DND Parameters
Field Description
DND Option When you enable DND on the phone, this parameter allows
you to specify how the DND features handle incoming calls:
• Call Reject—This option specifies that no incoming call
information gets presented to the user. Depending on how
you configure the DND Incoming Call Alert parameter,
the phone may play a beep or display a flash notification
of the call.
• Ringer Off—This option turns off the ringer, but
incoming call information gets presented to the device, so
that the user can accept the call.
Note For mobile devices and dual-mode phones, you can
only choose the Call Reject option. When you activate
DND Call Reject on a mobile device or dual-mode
phone, no call information gets presented to the
device.
DND Incoming Call Alert When you enable the DND Ringer Off or Call Reject option,
this parameter specifies how a call displays on a phone.
From the drop-down list, choose one of the following options:
• None—This option specifies that the DND Incoming Call
Alert setting from the Common Phone Profile window
will get used for this device.
• Disable—This option disables both beep and flash
notification of a call but for the DND Ringer Off option,
incoming call information still gets displayed. For the
DND Call Reject option, no call alerts display and no
information gets sent to the device.
• Beep Only—For an incoming call, this option causes the
phone to play a beep tone only.
• Flash Only—For an incoming call, this option causes the
phone to display a flash alert.