Canon DC20 EN - Manual (Page 75)

75
Ad
v
a
nced F
e
atures
Changi
ng
th
e FUNC.
Se
tt
ing
s
E
1. Set the camcorder to record movies ( ).
2. Upload a sample image from the supplied disc to the memory card.
Refer to Adding Still Images from Your Computer to the Memory Card in the Digital
Video Software instruction manual.
3. Move the mode switch to a position other than .
4. Press the FUNC. button.
5. First, select ( ) the current digital effects symbol from the left side
column and then select ( ) the [ CARD MIX] option from the
bottom bar and press ( ).
6. Select ( ) the [IMAGE SELECT] option, and then select ( ) the
still image you want to combine.
• The still image will be displayed briefly.
• Only still images recorded on the memory card can be selected for the Card Mix
function, regardless of the current media selection for still images.
7. Select ( ) the [MIX TYPE] option, and set ( ) a mix type
appropriate for the image you selected.
If you selected [C.ANIMATION], select ( ) [ANIMAT.TYPE] and set ( ) the
animation type preferred.
8. If you want to adjust the mix level, select ( ) [MIX LEVEL] and set
( ) the level preferred.
9. Press ( ) to save the settings and press the FUNC. button to close
the menu.
“ ” appears.
10.Press the D.EFFECTS button.
“ ” turns green and the combined image appears.
 Turn off the digital effects [D.EFFECT OFF] when you are not using them.
 The camcorder retains the setting last used even if you turn off the digital effects
or change the recording program.
 The image quality may be slightly lower with digital effects.
( 59)
D.EFFECT OFF
Omni Selector
FUNC. button
Mode switch