Canon DC20 EN - Manual (Page 129)

129
T
roub
le?
E
Memory Card Related Messages
DISC ERROR Disc could not be read. Try cleaning it or replace the disc. 133
This message can also appear if the camcorder has exceeded its
operational temperature. Disconnect the power adapter and
remove the battery and let the camcorder cool down before
resuming use. –
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use. 127
ACCESS ERROR There was a disc error when reading the disc or attempting to
write onto it. Try cleaning the disc or replace it. 133
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use. 127
DISC COVER IS OPEN Verify the disc is correctly inserted and close the disc cover. 31
NO DISC No disc is loaded. Insert a disc. 31
You inserted a disc recorded in a different Television System (PAL
or SECAM). –
This message can also appear if condensation has formed. Wait
until the camcorder dries completely before resuming use. 127
UNABLE TO RECOVER
DATA Could not recover a corrupted file. Initialize the disc. 91
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use. 127
UNABLE TO RECOVER
DATA INITIALIZE THE
DISC Could not recover a corrupted file. Initialize the disc. 91
This message can also appear if condensation has formed. If you
suspect condensation is the reason, do not initialize the disc and
wait until the camcorder dries completely before resuming use. 127
LOADING THE DISC The disc is being read. Wait before you start recording. –
OPENING THE DISC
COVER Do not force the disc cover open before it opens automatically. If a
disc is already loaded, this may take a moment. 31
Message Explanation
NO CARD Memory card not is inserted into the camcorder. 30
NO IMAGES No images are recorded on the memory card. –
CARD ERROR A memory card error occurred. The camcorder cannot record or
display the image.
The error may be temporary. If the message disappears after 4
seconds and “
” flashes red, turn the camcorder off, remove the
card and reinsert the card. If “ ” changes to green, you can
continue recording/playback.
–
CARD FULL Memory card is full. Erase some images to free some space or
replace the memory card. 94
NAMING ERROR The folder and file numbers have reached their maximum value. –
UNIDENTIFIABLE
IMAGE The image file is corrupted or it was saved using a compression
method other than that compatible with this camcorder (JPEG). –
TRANSFER ORDER
ERROR
You attempted to set more than 998 transfer orders. 112
TOO MANY STILL
IMAGES DISCONNECT
USB CABLE Disconnect the USB cable and decrease the number of still
images on the memory card or disc to less than 1800. Images
cannot be erased from a DVD-R or DVD-RW disc recorded in
VIDEO mode. If a dialog appeared on the computer screen, close
it. Reconnect the USB cable. –
Message Explanation