Canon DC20 EN User Manual
Page 125
125
T
roub
le?
E
Playback
Sound is distorted.
When recording near loud sounds (such as fireworks or
concerts), sound may become distorted. This is not a
malfunction.
–
A vertical light bar appears on
the screen.
Bright light in a dark scene may cause a vertical light bar
(smear) to appear. This is not a malfunction.
–
Viewfinder picture is blurred.
Adjust the viewfinder with the dioptric adjustment lever.
24
Cannot edit or delete scenes.
Remove the disc protection.
90
Scenes cannot be deleted in a DVD-R disc or a DVD-RW disc
recorded in VIDEO mode.
–
You cannot edit or delete scenes on a disc that was protected
in another digital device.
–
Cannot add scenes to the
playlist.
The disc is full (“
END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
31
87
Cannot divide the scene.
You cannot edit or delete scenes on a disc that was protected
in another digital device.
–
Cannot edit the disc title.
You cannot add a title to a DVD-R disc after it was finalized.
98
You cannot add recordings or edit the disc title on a DVD-RW
disc after it was finalized. Unfinalize the disc first.
101
You may not be able to edit the title if you entered it with
another digital device.
–
Disc is protected. Cancel the disc protection or replace the
disc.
90
Cannot create a Photomovie
scene.
There are no still images recorded on the disc.
–
The disc is full (“
END” flashes on the screen). Delete some
recordings (DVD-RW in VR mode) to free some space or
replace the disc.
31
87
Problem
Solution
Pressing the playback button
does not start playback.
Set the camcorder to
.
39
Load a disc.
31
You may not be able to play with this camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives.
–
Verify that the disc is inserted with the label side facing up.
31
During playback there is
video noise, the sound is
distorted or the disc cannot be
read.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
133
You may not be able to play with the camcorder discs
recorded or edited with other DVD recorders or computer DVD
drives.
–
Image will not appear on the
TV screen.
Check the connections and make sure the TV or VCR is set to
the correct input signal.
102
There is a brief stop between
scenes.
Depending on the DVD player, there might be a very short
stop between scenes during playback.
–
Disc is running, but image will
not appear on the TV screen.
TV/VIDEO selector on the TV is not set to VIDEO. Set the
selector to VIDEO.
102
You attempted to play back or dub an incompatible disc. Stop
playback/dubbing.
–
No sound from the built-in
speaker.
Speaker volume is turned off. Adjust the volume from the
[SYSTEM SETUP] menu in the
mode.
43
Problem
Solution