Canon DC20 EN - Manual (Page 63)

63
Ad
v
a
nced F
e
atures
Changi
ng
th
e FUNC.
Se
tt
ing
s
E
Setting the White Balance
You can choose one of the preset settings to reproduce colors more accurately, or set a
custom white balance to obtain the setting best suited to your specific recording
conditions.
1. Set the camcorder to a recording mode ( or )
and move the mode switch to .
2. Press the FUNC. button.
3. First, select ( ) the current white balance symbol from the left side
column and then select ( ) the desired option from the bottom bar.
4. If you select the custom white balance [ SET]: Point the camcorder
at a white object, zoom in until it fills the whole screen and press ( ).
• Keep the camcorder zoomed at the white object until step 5 is completed.
•
flashes and stops flashing when the adjustment is complete.
AUTO Settings are automatically set by the camcorder.
DAYLIGHT For recording outdoors on a bright day.
SHADE For recording in shaded places.
CLOUDY For recording on a cloudy day.
TUNGSTEN For recording under tungsten and tungsten type (3-wavelength)
fluorescent lighting.
FLUORESECENT For recording under warm white, cool white or warm white type
(3-wavelength) fluorescent lighting.
FLUORESCENT H For recording under daylight or daylight type (3-wavelength)
fluorescent lighting.
SET Use the custom white balance setting to make white subjects
appear white under colored lighting.
( 59)
AUTO
White sheet or paper
(if you select
SET)
Omni Selector
Zoom lever
FUNC. button
Mode switch