8 connector cover, 8 connector cover –19 – Compaq N1020V User Manual

Page 125

Text mode
Original mode

Removal and Replacement Procedures

Maintenance and Service Guide

5–19

5.8 Connector Cover

✎

The connector cover is available with carbon finish for Evo
Notebook N1020v and N1000v models and silver finish for
Presario 1500 models, and are included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285541-001.

1. Prepare the computer for disassembly (Section 5.3).

2. Turn the computer bottom side up with the rear panel facing

forward.

3. Remove the two TM2.5 × 5.0 screws 1 that secure the

connector cover to the base enclosure (Figure 5-15).

4. Open the connector cover 2.

5. Remove the connector cover from the base enclosure 3.

Figure 5-15. Removing the Connector Cover

Reverse the preceding procedures to install the connector cover.