Canon Multimedia Projector LV-8235 UST - Manual (Page 8)

8
– Remove the batteries when they have been
exhausted or not in use for an extended period of
time.
– Be sure to replace both batteries at the same time.
Do not mix batteries of different types.
– Insert batteries correctly according to the “+” and “-“
markings.
– If a fluid from a battery leaks and comes in contact
with your skin, rinse the affected skin thoroughly as
soon as possible.
– Do not place heavy objects or step on the projector.
Be especially careful that small children do not step
on the projector. If not, the projector may drop or
break, causing injury.
– Disconnect the power cord from the power outlet if
the projector is left unused for a long period of time.
Failure to do so may result in a fire.
– Do not bring your hands to the peripheral part of the
exhaust vent on the cabinet. This area becomes hot
during use. Be especially careful that small children
do not touch the area. Failure to do so may result in
burn.
– Do not put metal objects in front of or near the
exhaust vent. They will become hot while projector
is being used.
– Do not place the projector on top of unstable or
slanted surfaces. The projector may fall down and
cause injury.
– Do not attach the lens cover while the projector is
being used or place any objects in front of the lens.
Failure to do so may result in a fire.
– A buildup of dust inside the projector can cause a
fire or damage. Consult your dealer for cleaning.
– When installing the projector to a ceiling, consult
your electrician or dealer. If the projector is not fixed
securely, accidents may result.
– Never take out the lamp soon after the projector
is used. Let the projector cool for at least 1 hour
before taking out the lamp, as burns may result.
– If the lamp replacement icon appears or the LAMP
REPLACE indicator lights orange, immediately
replace the lamp with a new one. Otherwise, the
lamp may burst.
– If the lamp burns out, the gas or dust (containing
mercury) inside the lamp may escape from the air
vents. Immediately open the windows and ventilate
the room. If you inhale the gas or the gas gets into
your eyes or mouth, see a doctor at once.
– Dispose of a lamp containing mercury in the same
manner as fluorescent lamps according to local
regulations.
– This projector is a precision machine. Do not subject
the projector to strong shocks or vibrations or knock
it down. Remove the lens, close the lens mounting
hole with the front cover, and retract the adjustable
feet before placing the projector into the carrying
case. The projector may be damaged if you place it
in the case without retracting the adjustable feet.
– Place the projector into the specified case when
transporting it by courier or any other transportation
service. Consult your dealer for the case.
– Keep space of 1 m or more at the sides of the
projector between the intake/exhaust vents and
walls. Poor ventilation may cause malfunction.
– Do not install the projector in the locations with
heavy dust, high humidity, oily vapors, or cigarette
smoke.
A buildup of dust on the optical elements such as
lens or mirror may degrade image quality.
– Directly touching the lens may cause poor image
quality.
– If the projector is carried from a cold place to a
warm place or the room temperature is raised
rapidly, condensation may form on the lens and
mirror due to the moisture in the atmosphere,
resulting in a blurred picture. Wait until
condensation evaporates and normal picture is
shown.
– Do not install the projector in the locations with
great difference in temperature. Doing so may
cause malfunction. The ranges of the operating and
storage temperatures are as shown below:
Operating temperature: 41˚F–104˚F [5˚C– 40˚C]
Storage temperature: 10˚F–140˚F (-10˚C- 60˚C)
– Do not install the projector near high-voltage electric
power lines or power sources.
– Do not place the projector on a carpet or bed. The
internal temperature will rise, causing malfunction.
– To avoid increase in the internal temperature, do not
block the intake/exhaust vents.
– Position the projector at a proper angle. Incorrect
positioning may cause troubles and accidents. Do
not roll the projector more than 10 degrees from the
horizontal.
– Do not place any heat-sensitive objects on the
projector.
Precaution During Use
CAUTION
CAUTION
Safety Instructions