Canon Multimedia Projector LV-8235 UST - Manual (Page 22)

22
The preparation display will disappear after 30
seconds.
(See page 60 for Lamp mode status.)
Turning On the Projector
Connect the projector’s AC power cord into an AC
outlet. The POWER indicator lights red.
Press the POWER button on the remote controller or
on the top control. The POWER indicator lights green
and the cooling fans start to operate. The preparation
display appears on the screen and the countdown
starts.
2
3
1
4
After the countdown, the input source that was
selected the last time and the Lamp mode status icon
(See page 60) appear on the screen.
Complete peripheral connections (with a computer,
VCR, etc.) before turning on the projector.
Selected Input Source and Lamp mode
Note:
• When the Logo select function is set to Off, the logo will
not be shown on the screen. (p.55)
• When Countdown off or Off is selected in the Display
function, the countdown will not be shown on the screen.
(p.55)
• During the countdown period, all operations are invalid.
• When the Auto input function is set to On 2, the input
signal will be searched automatically. (p.53)
• When Off is selected in the Display function, the Video
/PC selection window and the input signal guidance
window are not shown on the screen. (p.55)
Note:
The Filter warning and Lamp replacement
icons may appear on the screen depending
on the usage state of the projector.
Basic Operation
If there is no signal input when start on the projector,
or the current signal is missed while operating the
projector, the Video / PC selection window will be
displayed on the screen, please move the pointer
to input source desired by pressing the Point 
buttons and press the OK button. And then follow the
input signal guidance window to correct the signal and
connection.
If the projector is locked with a PIN code, PIN code
input dialog box will appear. Enter the PIN code as
instructed on the next page.
5
Video / PC selection window
Video / PC selection window
Input signal guidance window
Input signal guidance window
Lamp mode status
16