Canon B115 - Manual (Page 76)

5-13
5
SENDI
NG DO
CUMENTS
Sequential broadcasting
Sending a document to more than one location ___
Sequential broadcasting sends one document to more than one location.
You can send to a total of 60 locations as follows:
• One-touch speed dialling = 9 locations
• Coded speed dialling = 50 locations
• Regular dialling (Numeric buttons dialling) = 1 location
You can enter the one-touch speed dialling and coded speed dialling locations in any order. You simply
press the one-touch speed dialling button, or press [Coded Dial/Directory] followed by the two-digit code.
You can also include one location using regular dialling. Remember that when using regular dialling, you
must press [Start/Copy] after entering the number.
Note
You must press each button within 10 seconds of the preceding one. The fax begins the operation
approximately 10 seconds after you press the last button.
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2
Dial the receiving party’s fax numbers as you need.
You can also press [Redial/Pause] to redial the last number
dialled with the numeric buttons.
3
Press [Start/Copy].
• The fax reads the document into memory and begins
sending.
• To cancel a transmission, press [Stop] during dialling or
transmission. All transmissions in the sequence are
cancelled.
TEL= 34567890