Cygnion CG 2400 - Manual (Page 199)

C
h
a
p
te
r 8
:
Ha
n
d
se
t C
u
st
o
m
iz
a
tio
n
187
To change the speaker extension number, press
to clear the old number, then type the new
number.
3. Press to confirm.
To activate the monitor handset (in baby’s
room):
1. Press to access and move through the
menu.
2. Select >Settings >Handset >BabyPhone
>Activate and press .
3. If BabyPhoneFailed displays, either the handset
number entered is incorrect or the phone is out of
range. If BabyPhone displays, the monitor has
been successfully activated.
End the BabyPhone function by pressing .
To turn the information tone on or off:
1. Press to access and move through the
menu.
2. Select >Settings >Handset >BabyPhone
>InfoTone and press . The current setting
displays.
3. Select On or Off.
4. Press
to confirm selection.
Using Direct Call
Direct call is a feature that lets you program the
handset to dial a set number regardless of which key
is pressed. Direct call can be activated with any key
on the keypad.
This feature is useful if there is a number that you
call repeatedly, or if you want to program the phone
for a child to contact you easily while you are out.
Pressing any key again will end the call.