Philips AZ3705 - Manual (Page 17)

Cassette Deck
Loading a cassette
• Press STOP'OPEN 14 .
-* The cassette compartment door opens.
• Load the cassette with the open side to the front and the full spool
to the left.
• Close the cassette compartment door.
Tape Playback
1 Press SOURCE to select TAPE.
2 Load a cassette in cassette deck.
3 Press PLAY ► to start playback.
• Press PAUSE II to interrupt playback.
4 Press STOP»OPEN to end playback.
Note:
To change to other source mode (TUNER or CD) from the TAPE mode,
the tape deck must be in the stop mode.
Fast winding/rewinding
1 You can fast forward or rewind the tape by pressing SEARCH ►►
or-M.
2 Press STOP*OPEN BA to stop fast forwarding or rewinding.
Note:
It is possible to fast forward or rewind a cassette when the set is in
another source mode (e.g. tuner mode)
Recording Operation
1 Press SOURCE to select CD or TUNER.
2 Load a blank cassette In cassette deck.
3 Press RECORD • on cassette deck to start recording.
4 Press STOP»OPEN BA on cassette deck to stop recording.
W
"3)
'•44 . » '• ■*
>• 4« »» ■* >'
CD Synchro-start Recording
1 Press SOURCE to select CDC.
2 Load a disc into the disc tray.
3 Load a blank cassette (full spool to the left) into cassette deck.
• If desired, you can program the discs and its tracks in the order
you want to be recorded (see Programming Tracks).
4 Press RECORD • on cassette deck to start recording.
CD starts playing after a seven-second delay to prevent
recording on the transparent leader tape portion at the
beginning of the tape.
5 Press STOP B on CD and STOP«OPEN BA on cassette deck to
stop recording.
I 0-0 u
cS> c£> CS>CP>
D-Crn
■ D L
17