Philips AZ3705 - Manual (Page 15)

CD Changer
Repeat
Repeat - repeat playingatrackfromthecurrent disc orall the loaded
discs.
To repeat playing a track from the current disc
1 Press REPEAT once.
The REPEAT flag appears on the display.
2 Press SEARCH or until the desired track appears on the
display
• Press PLAY«PAUSE Hi to start play if the CD is at the stop
mode.
3 To return to normal CD play, press REPEAT until the display
indication disappears.
To repeat all the discs and tracks
1 Press REPEAT twice.
-*The REPEAT ALL flag, the total number of tracks and playing time
of the last disc appear on the display.
• Press PLAY»PAUSE Hi to start play if the CD is at the stop
mode.
2 To return to normal CD play, press REPEAT until the display
indication disappears.
Note: You can activate the different playing modes at the same time,
e.g. to continually play the entire CD or program in random order
(REPEAT ALL/SHUFFLE).
CO ntOCMU ISKAT
o
*3)
REPEAT
I___________ :_______
t REPEAT Aa
^ i_3 5U-3 I
¿i? CiP (iif CLSPirP
Programming Tracks
Programming tracks of the loaded CDs is possible in the stop mode of
the CD. Reviewing of a program is only possible in stop mode. The
display will indicate the total tracks stored in the program. Up to 70
tracks can be stored in the memory in any order. When 70 tracks have
been stored, the display will show program and T uLL”.
1 Load the desired discs in the disc trays.
2 Press STOP ■ before you start programming.
3 Press CD PROGRAM to start programming.
-*The PROGRAM flag flashes on the display.
4 Press the desired disc button to select the disc.
5 Press SEARCH or to select the desired track.
6 Press CD PROGRAM to store the track.
• Repeat steps 4 through 6 to store other discs and tracks.
7 Press STOP ■ to end programming.
• If during programming there is no action performed within 10
seconds, the programming will stop automatically.
PROGRAM
£Shi
Cl II 1
1 Ul_l_
dC?
d£5
C£:>CP>
CD RCPCAT
o
I D-DU
0-0 n
o
15