Philips AZ3705 - Manual (Page 13)

CD Changer
You can load up to seven discs in the CD changer for continuous play
without interruption. You can see the display of the selected or
current disc on the display panel. All trays in the CD changer can be
used to play 12-cm discs (except for tray-1, which can also be used for
a 8-cm discs without an adaptor). If you want to load the 8-cm disc on
the other trays, you need an adaptor (not supplied).
Loading Disc
1 Press SOURCE to select CDC.
2 Press OPEN*CLOSE.
— Disc tray 1 will be opened.
3 Load a disc with the printed side up in the disc tray.
4 Press OPEN'CLOSE.
The total number of tracks and playing time appear on the
display.
• To load the remaining disc trays. Press the respective disc button
to open the tray door, press the OPEN »CLOSE to close the tray
door.
1 - indicates the disc tray is empty.
CiP - indicates the disc tray is loaded with a disc.
- indicates the current or selected disc tray is
ready for playing.
Playing a Disc
1 Press PLAY»PAUSE Hi (or HI on the remote control) to start
playback.
The disc, track number and elapsed playing time of the current
track appear on the display.
• To interrupt play, press PLAY»PAUSE HI (or Hi on the remote
control).
-* The track number and elapsed playing time flashes on display.
• To resume play, press PLAY»PAUSE HI again (or Hi on the
remote control).
2 To stop play, press STOP ■ (orB on the remote control).
Note:
When the current disc has completed playing, the set will select the
next disc and start playing automatically. If the next disc tray is empty
it will then select the next available loaded disc tray.
You can also play CD directly by pressing the 7 CD DIRECT PLAY
button.
PIAY'PAUC£ STC?
0
SDUSCH
0
j
iЗn