Philips AZ3705 - Manual (Page 16)

CD Changer
m
3
*S.
w'
Playing the program
1 Press PLAY«PAUSE Hi to start program playback.
— The track number and elapsed playing time of the current track
appear on the display.
2 Press STOP ■ to stop program playback.
Reviewing the program
• Press and hold CD PROGRAM for more than 2 seconds.
The program will be reviewed automatically.
Erasing the program (in the stop position)
• Press STOP ■.
-*The PROGRAM flag disappears from the display.
— If the OPEN*CLOSE is pressed, it will only erase program of
the current selected disc. The rest of the program remains.
Note:
Program is erased when the set is switched off.
PtAY-PAUS£ SrcP
I SEXOCH
CD Lock
CD Lock - to lock the CD changer mechanism before moving the set or
prohibit the changing of disc during CD play.
When playing a CD:
• Press CD LOCK will restrict you to playing only the current disc.
A red LED will lights up beside the button and the display will
showTuCfi”.
-* You will not be able to open the locked tray or select and play
the other trays that are loaded with CDs.
• Press CD LOCK again to release the lock mode.
The red LED will be switched off and the display will show
’NO LOCK".
Before transporting the set:
1 Press SOURCE to select CDC.
2 Press CD LOCK to secure the CD mechanism.
—A red LED will light up beside the button.
When transporting to a more remote location, remove all
CDs from the CD changer mechanism.
3 Press POWER to switch off the set.
4 Unplug the AC power cord from the set and the wall outlet.
5 After you have relocated the set, reconnect the AC power cord.
6 Press POWER to switch on the set.
16