Philips 27ce7695 - Manual (Page 23)

8. Display
IB
WmkiEi
I A
I
B
I
C I D
I
m
DISPLAY
o
The display indicates the selected
source and the programmed operating
functions A, B, C and D.
Switch on the display with the DISPLAY
button, or by giving instructions with
the other buttons.
The display is automatically switched
off if no more instructions are given for
about 30 seconds.
9. STORE OPEN and STORE EXECUTE buttons
With these buttons other sources and functions can be ■
programmed.
Programming the remote
control
1. Reprogramming source selector
buttons EXT 1 and EXT 2
If desired, you can program buttons
EXT 1 and EXT 2 for another source*.
• Select the source to be changed
(EXT 1 or EXT 2).
• the C> (OPEN) button.
The indications on the display will flash.
• Now select with the digit buttons the
two-digit code for the source to be
selected.
The display will now indicate alternately
the newly selected code and its
abbreviation. Furthermore the
programmed functions A, B, C and D
are shown.
Code Indication Source
00 TV Television
02 TXT Teletext
04 LV LaserVision
05 VCR Video recorder
08 SAT Satellite Tuner
12 CDV CD Video Player
• Press the O (EXECUTE) button.
The flashing stops and the newly
selected source is stored in the
memory.
Important!
If you have programmed a new source
name on EXT 1 or EXT 2 of the remote
control unit, you should also program
the new source name on EXT 1 or EXT
2 of the A/V tuner amplifier.
IT
r*7P
TUNER-I I 1 AUX.1^-1 1-AUXJ2
2. Reprogramming buttons A, B, C
and D
(See the function code table for the
programming of the system remote
control unit.)
If desired, you can program buttons A,
B, C or D for another function.
• Select the source under which you
want to change function A, B, C or D
(TV, VCR. EXT 1, EXT 2. TXT. A-TU,
TAPE. AUX1 orAUX2).
• Press the ^ (OPEN) button.
The indications A, B, C and D will flash
on the display.
• Select the button A, B, C or D to be
programmed.
Flashing bars will appear as an
indication in the appropriate place.
• Now select with the digit buttons the
three-digit code for the function to be
selected (see the code table in the
back).
The display now indicates alternately
the newly selected code and its
abbreviation.
• Press the O (EXECUTE) button.
The flashing stops. The newly selected
function is stored in the memory.
RECORDING
TO TAPE
TUNER -I I I
AUX.1—1 L.AUX2
RECORDING
TO VCR
GD
TUNER-i I I ^ AUDIO
EXT.1------ 1 »----- EXT.2
Sound and picture recording
facilities
It is possible to make picture and
sound recordings from equipment
(sources) connected via the A/V tuner
amplifier and to watch or listen to
another source at the same time.
1. For recording with an Audio Cassette
Recorder or a HiFi video recorder that
is used as an audio recorder, the TO
TAPE switch shouid be in position
TUNER (Radio), AUX1 (Record player)
or AUX2 (Compact Disc), depending
on which source is to be recorded.
2. For recording with a video recorder,
the TO VCR switch should be in
position TUNER (TU), EXT 1 (Satellite
Tuner) EXT 2 (CD Video Player) or
Audio, depending on the source to be
recorded.
The audio source to be recorded is
determined by the position of the TO
TAPE switch.
Note: For recording you should also
consult the operating instructions of
the equipment to be used.
19