Philips 27ce7695 - Manual (Page 21)

Press the CONNECT Q* button.
To operate the record player:
See the operating instructions of the
record player.
6. Compact Disc Player (CD)
To operate the CD player:
See the operating instructions of the
CD player.
It is possible to connect a suitable
piece of equipment to the A/V tuner
amplifier via the REMOTE OUT
terminal.
A unit connected in this way can also
be operated with the remote control
unit.
Important!
A unit that is suitable for remote control
and that has been connected with
Eurocables, receives the signals from
the remote control unit via the monitor
and the A/V tuner amplifier through the
Euroconnectors.
Note: Euroconnectors EXT 1 and EXT
2 can be programmed for other
connections (sources).
For this, see the relevant text.
(Re) programming the source
name for EXT 1 and EXT 2
• Press the desired button EXT 1 or
EXT 2.
• Press the STORE (A) button.
The CODE? indication flashes on the
display of the A/V tuner amplifier.
• Enter the desired two-digit code with
the digit buttons on the remote control
unit.
Code Indication Source
00 TV Teievision
02 TXT Teletext
04 LV LaserVision
05 VCR Video recorder
08 SAT Satellite Tuner
12 CDV CD Video Piayer
• Press the EXECUTE (D) button.
Note: The remote control unit should
also be programmed for the ‘new’
source name. For this, see
‘Reprogramming source selector
buttons EXT.1 and EXT.2’ in the section
on ‘Programming the remote control’.
O ^ b
Headphones
This terminal on the A/V tuner amplifier
is for a set of headphones with an
impedance between 8 and 1000 ohms
and is of the 6.3 mm jack type.
With headphones connected, you can
adjust the volume with the
—VOLUME-F buttons.
Use the DUAL I-II buttons on the A/V
tuner amplifier for selecting another
language (if transmitted).
Note: Language selection is only
possible in position TV.
If a video tape or a CDV disk is
muitilingual, you can select the
language with the DUAL button on the
remote control unit.
17