Philips 27ce7695 - Manual (Page 13)

Picture In Picture (PIP)
PIP enables you, when you are
watching TV, to call up an extra
picture*, to swop it with the main
picture, to shift it and to freeze it.
Note: The remote control should be in
TV mode.
* a. The same picture as the main
picture.
b. The picture from a connected
CVBS source, for example a video
recorder. (This enables you, when
you are watching TV, to watch an
extra TV picture from another TV
programme or a video recording.)
For optimum use of PIP, it is advisable
that you have an extra tuner, for
example a video recorder, at your
disposal.
The following buttons are available on
the remote control unit:
PIP PIP on/off
SELECT Source selection
SWOP Swopping the picture
SHIFT Shifting the picture
FREEZE Freezing the picture
Connecting the (PIP) sources
(For connection of the sources, see the
chapter ‘Other equipment that can be
connected to the A/V tuner amplifier’.)
It is possible to obtain a PIP picture
from the internal TV tuner of the A/V
tuner amplifier and from 3 external
video sources with CVBS signals. In
that case, the video sources should be
connected to the Euroconnectors
(EXTERNAL 1, EXTERNAL 2, VCR) of
the A/V tuner amplifier.
Operating PIP
(with monitor and A/V tuner amplifier
switched on)
Switching on
• Press the PIP button.
The extra TV picture appears in the last
selected place and comes from the last
selected source.
Switching off
• Press the PIP button again.
Source selection
Selecting the desired PIP source*
• Press the SELECT button.
Now another connected (PIP) source is
selected.
When a source is selected with the
SELECT button, the source name of
the main picture and the name of the
source selected for PIP will appear on
the screen (OSD).
* PIP sources
1. TV tuner of the A/V tuner amplifier as
PIP source (PIP picture has blue
frame).
2. PIP from videorecorder (PIP picture
has orange frame).
3. PIP from EXT.1 (PIP picture has
purple frame).
4. PIP from EXT.2 (PIP picture has
green frame).
Note: When the video recorder has
been selected, the stored TV stations
of the video recorder tuner can be
selected as PIP picture. You can either
do this via the programme selection
buttons on the remote control unit
(remote control in VCR mode) or direct
on the video recorder.
Swopping the picture
• Press the SWOP button.
The main picture is swopped with the
PIP picture.
• Press the SWOP button again to
swop again.
Shifting the PIP picture
• Press the SHIFT button.
The PIP picture shifts every time the
SHIFT button is pressed.