Connect, Programme selection, Changing picture and sound – Philips 27ce7695 User Manual
Page 12: Green button, Picture/contour accentuation, Language seiection, Spatial sound with stereo signals, Muting, Time indication
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

BT
^POVVER^
TV
DT
CONNECT
C3-
B. Television (monitor) in
combination with remote
control
Switching on {if necessary)
• Press the POWER button on the A/V
tuner amplifier.
• Press the POWER button on the
monitor.
Seiecting the TV function on the
remote controi unit
• Press the TV button.
The TV indication appears on the
display of the remote control unit.
• Press the CONNECT Q*- button.
The TV indication followed by a
programme number, or TV.C followed
by a channel number, appears on the
display of the A/V tuner amplifier.
Programme selection
Note: if necessary, put the A/V tuner
amplifier in the programme numbers
mode by pressing the VIDEO C/P
button.
Select the desired programme number
(TV station) with the digital buttons.
• First press the •/- button for
programme numbers consisting of two
digits.
• Return to one-digit programme
numbers by pressing the •/■■ button
again.
Note: When a programme number is
selected, the number and, where
appropriate, the programmed station
name, appears for about 3 seconds in
the top right-hand corner.
During stereo transmissions the word
‘STEREO’ also appears.
During transmissions in two languages,
the word ‘DUAL’ I or II appears.
Changing picture and sound
If desired, you can change colour
saturation @ COLOUR), brightness
(BRIGHTNESS), volume high notes
I (TREBLE), low notes 9> (BASS) and
balance L/R with the corresponding
buttons on the remote control unit.
Green button
After changing the picture and sound
settings, you can return to your
personal preference.
• Press the green PP button.
Picture/Contour accentuation
Depending on your preference, you can
switch on the picture/contour
accentuation.
Switching on (remote control should
be in TV mode)
• Press the CRISP button.
The CRISP indication on the monitor
lights up.
Switching off
• Press the CRISP button again.
The CRISP indication goes off.
Language seiection
For dual-language transmissions the
indication DUAL I or II will appear when
the corresponding programme number
is selected.
• Press the DUAL I button to hear the
other (2nd) language.
• Press the DUAL button again to
select the 1st language.
SOUND SELECTION
”
V
O
O
MONO
LOUDNESS OtLOFF
Spatial sound with stereo
signals
• Press the SPATIAL button.
The QO indication on the A/V tuner
lights up.
• Press the SPATIAL button again to
switch off this effect.
Note: For this, the A/V tuner amplifier
must not be in MONO mode. (If
necessary, press the MONO ON/OFF
button.)
Muting
• Press the MUTE button.
• Press the MUTE button again to
resume sound reproduction.
Time indication
• Press the 9 (SUBCODE) button.
If it is transmitted, the time appears in
the top right-hand corner of the screen.
• Press the 9 (SUBCODE) button
again to remove the time.